Graphene Wax Car Care Durable Paintwork Protection 50ml

Graphene Wax from the Infinity Wax range is a highly durable wax with insane water beading/sheeting that's as easy to use as a show wax. It is easy to apply and remove, and it's very resilient.

Available in a 50ml glass jar.

Application instructions:
1. Prepare the surface before waxing, this may include removal of previous waxes and sealant but please note this is not essential but will yield greater results if completed.
2. Take 1-2 swipes from the pot, only use soft foam to apply this wax. Once you have loaded the applicator proceed to press it over a small area of the panel several times, this creates an even application by collecting more wax as you work across the panel. Always ensure an even thin layer is applied, over-application will have negative effects on removal and performance.
3. Remove the wax with a short pile towel like our general weave cloth after 1-5 minutes maximum, this means only 1-2 panels at a time. A final wipe down using our plush yellow buffing towel is also desirable but not essential.
4. After application, allow 3 hours for this wax to bond before wetting the vehicle, and do not wash for 7 days after application.

Hazard! - May cause irritation to skin, eyes and airways. Contains Hydrocarbons C10-C13, Siloxanes & Silicones 71750-79-3 and Graphene Nanoplatelets 7782-42-5. Material Safety Data Sheet (MSDS) sheet is available 24/7 on www.infinitywax.com

Safety Information:
Keep out of reach of children. Always wear gloves when using this wax. If any skin irritation develops stop using, remove clothing that may be contaminated and wash the skin with cold soapy water only, begin to introduce gentle scrubbing unless the skin is broken. If in any doubt seek medical advice and show the product MSDS sheet.

Storage: Always store this wax in a cool area where temperature fluctuations are minimal.